Sync Generator Configuration
2. Set jumper on the alarm to disabled position, by removing the jumper on pins 1&2 ad replacing on the bottom 2&3 pin position
3. Configuring IP Settings:
4. Restore card to device and close front panel, power on device.
5. Connect Ethernet to both devices
6. Set Computer Network card to the following IP address to begin communication:
192.168.2.2
255.255.255.0
192.168.2.1
7. Open the Dashboard application and add a new connection using the "green plus sign"
8. Select open Gear/Dashboard Connect folder and select TCP/IP Dashboard
9. Type in sync generators IP:192.168.2.1 and detect frame and finish
10. Once the frame is detected, you can adjust the settings by double clicking the frame name in the basic tree view
11. Double click on the MFC card to open settings
12. Change the name on the network tab and right: (FRAME#_QUAD) example; 173893183_A4
13. Select/Double click on the Slot SPG card and Set the reference to Internal
14. Set the Reference rate to 30 Hz
15. Set the 4 outputs to format of 1080p 30
16. Double click on the UDA card to open settings and make sure that there is a check in the box to notify on loss of input
17. Right click on the frame in the basic tree view and save configuration settings with both check boxes selected
Related Articles
Automated Weekly Dump Upload Configuration
A task setting is configured to upload the GOAA production SDS Configuration Files to the cloud for the Synect Development team to evaluate and run concurrently in the Synect Redmond Lab. The files are uploaded to the Synect bitbucket.org account. ...Server Provisioning Process NT
1. Connect 4-8 displays and power on device 2. Add server information to inventory list 3. Disabling POST step #1 Silent Boot Procedure (0n CCCores only) POST is visible when first booting up a machine, before the operating system is loaded. Here ...Adding a new counter title
1. Solutions team will send the complete delivery to be added to the GOAA environment 2. Download to Z: Drive/GOAA Content SAN server into the proper folder in existing tree 3. In the resource library, Create a new folder with ...Custom Airline Timing Orchestration and Timing Rules
Requests to change the airline timing for the Display ground and coming soon for airlines. The global time is set for 4.5 hours prior to departure This example will change Alaska to a 3.5 hour prior to departure setting Verified the timing rules for ...Sequence Orchestration Rule Configurations
Video Wall Orchestration “Sequence Rule” Opening Times and Settings The SDS provides an option that allows for specific airlines to open and close the video wall orchestration at a specific time frame. This is the “Start Sequence Rule” and the “End ...